|
FOR IMMEDIATE RELEASE
Contact:
Dan Rudd
Phone:
407.330.9727
FAX:
407.322.8632
E-Mail: sales@mpsracing.com
Web: www.mpsracing.com
Sanford,
Florida, 08/06/2003 – Fast, quick, easy electronic fuel injection fuel
management. That’s what is in the
package of every MPS Fast FI Mixture Control.
The original “MPS Mixture Control” sold in 1981 was the first
motorcycle fuel injection aftermarket product.
The second generation Fast FI Mixture Control sets new standards for fuel
management with a dry nitrous system incorporating the instant rich feature.
The Fast FI Mixture Control was designed to be a universal application
and will work on most late model four cylinder electronic fuel injected
motorcycles.
The MPS
Fast FI Mixture Control P/N 1-0337 is a simple means to adjust the fuel curves
on your fuel-injected motorcycle. This
allows for tuning after the installation of aftermarket exhausts, intake
modifications, or internal motor modifications. It can only richen the fuel mixture. It cannot lean the mixture.
The Fast FI Mixture Control has a low speed pot that adds fuel at low
speed much like a mixture screw on a carburetor. The accelerator pump pot is an extra enrichment when the unit
senses rapid rpm acceleration. This
acts like the traditional accelerator pump on a carburetor.
The high-speed pot controls the high RPM like the main jet of a
carburetor. The high-speed RPM set
pot determines what RPM the low speed pot is no longer controlling the mixture
and the high-speed pot takes over. The
Fast FI Mixture Control has an instant rich feature to work with Dry Nitrous
Systems. It locks the fuel
injection system in a full rich mode instantly via a signal from the Dry Nitrous
System. This means no more
reprogramming for NOS operation. The
Fast FI Mixture Control looks at the fuel injection map the same way the factory
does and adjusts it the same way the factory does.
Because our product is not compatible with other aftermarket products we
recommend removing any other type of non-factory adjustments, downloads, etc.
before installing the Fast FI Mixture Control.
The MPS Fast FI Mixture Control is racer priced at $229.00 and are in
stock for immediate shipment.
#
# #
All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.
Motorcycle Performance Specialties
5350 McIntosh Point #132 - Sanford, Florida - 32773
Phone: (407)330-9727 - Fax: (407) 322-8632
Sales E-Mail: sales@mpsracing.com
©1995-2005 Motorcycle Performance Specialties. All rights reserved. | Privacy Policy
