Computer interface for easy programming  

0-25 degree start retard 

Mapable run timing curve 

Launch Ramp Delay by time 0 - 2.5 seconds 

Three step retards by RPM or switch 

0 - 2.50 Second step retard off delay for precise nitrous control 

Progressive timing retard by time for progressive NOS 

Launch Timing Curve to prevent tire slippage 

Individual cylinder timing when optional cam sync sensor is used 

Gear Retard - Retard a different amount for each gear 

Shift Kill feature with programmable delays 20-99 milliseconds 

Shift Kill Modes for Manual, Auto 1, 2 and Auto 1, 2, 3 

Optional Boost Retard curve when used with an external MAP sensor for turbo applications (2 - 45 PSI) 

Built in RPM Activated Window Switch - Turn any device up to 3 amps on at any rpm then back off at a different RPM 

Sequential Shift Light - Turn on an optional shift light at a different rpm for each gear 

Sequential Shifter - turns any air shifter into a fully automatic shifter (3 amps max) 

Tach Output wire for tachometers or data recorders 

Monitor Mode for easy set up of three step switches

Optional hand held programmer for quick changes 

Optional handle bar mounted launch RPM Selector 

Optional tester will test all options