1. Assemble the tube-mate end onto the hose onto the hose per Auto-Fit hose and instructions.

2. Cut and de-burr the tubing. The cut must be square.

3. Using the Tube-Mate grooving tool, groove the tubing. The tubing may also be beaded (or barbed). See Earl's new tube beading tool.

4. Push the tubing into the correct size Tube-Mate until it bottoms.

5. Tighten the Tube-Mate nut.

6. Blow the assembly clean and pressure test before running the car.

NOTE: Tube-Mate hose ends are designed to be used only with beaded, barbed or grooved rigid tubing at no more than 25 psi working pressure.

All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.

Motorcycle Performance Specialties
5350 McIntosh Point #132 - Sanford, Florida - 32773
Phone: (407)330-9727 - Fax: (407) 322-8632
Sales E-Mail: sales@mpsracing.com