MPS Water Injection Kit
The MPS Water/Methanol Injection kit for the Hayabusa will help keep your nitrous engine together longer. The water/methanol injection will help carry engine damaging heat out of the engine allowing you to make more power reliably. A 50/50 mix of water and methanol is normally used where rules allow or 100% water where rules dictate water only. The intake bells are custom for the Gen 1 or Gen 2 Hayabusa and have a very fine mist nozzle with an 80 degree full cone spray pattern. They have a .010” orifice and flow .63 GPH (Gallons per Hour) at 40 psi and 2.00 GPH at 100 psi. You can use pulse width modulation like a nitrous stage to vary the amount of water as well as pressure. We normally use a nitrous stage to control the water/methanol injection. The kit is made for no air box applications only. Intake bells available in 11 colors.
|
Part Number |
Description | Racer Price | |
|---|---|---|---|
|
1-0792 |
MPS Water Injection Kit Gen 1 Hayabusa |
$418.95 |
|
|
1-0793 |
MPS Water Injection Kit Gen 2 Hayabusa |
$418.95 |
|
|
1-0804 |
MPS Water Injection Kit GSXR1000 05-08 |
$418.95 |
|
|
1-0802 |
MPS Water Injection Intake Bells Hayabusa Gen I |
$124.95 |
|
|
1-0801 |
MPS Water Injection Intake Bells Hayabusa Gen II |
$124.95 |
|
|
1-0800 |
MPS Water Injection Intake Bells GSXR1000 05-08 |
$124.95 |
|
|
1-0814 |
MPS Water Injection Kit No Intake Bells |
$366.45 |
|
|
1-0794 |
MPS Water Injection Nozzle |
$21.00 |
|
|
1-0795 |
MPS Water Injection Nozzle Ultra Fine |
$115.50 |
|
|
1-0803 |
MPS Water Injection Nozzle Mount |
$10.50 |
|
