RPM Data Logger

A good, high speed data logger will provide a wealth of information that will improve your ability to get the most from your bike. You will be surprised just how much you can learn about your bike in a short time. The information provided by the data logger takes the guesswork out of tuning and setup. The time it takes to identify and correct difficult problems is drastically reduced. Often, the problems can be identified in the first pass.

The basic system provides engine RPM and output shaft RPM, allowing you to measure tire spin, shift points and converter efficiency. The ET presentation and run to run overlay allows you to identify in detail, the differences between runs. This system is fully upgradeable.

Basic Kit Includes:

RPM PRO Software
DL10 Data Logger
1 Hall sensor
1 Pinion Collar, 4 magnet
Remote start cable and switch
All sensor cables
Small size: 5.25" x 4.25" x 1.25"

Software

The RPM PRO software for PC includes most of the features found in software packages costing $700.00 or more, as well as many additional features not yet available elsewhere. The entire program was designed with an intuitive, easy-to-use operator interface which allows you to be up to speed quickly.

Here are a few of the main features:

Fully configurable, split graph display allows data channels to be presented as you choose. Each channel can be configured for position, color, scale and filtration.
Auto load graphics control immediately displays an initial graph format of your choice.
Four run overlay presentation for in-depth, run-to-run comparisons.
"Quick Graph" function allows you to easily add or remove 1 or all data curves from a run with one click.
Fully functional Log book allows you to set it up with as few or as many entries as you like.
On graph time slip, split times, and notes field allows you to enter and review time slip and pertinent info without having to exit the graph or open the log book. When reviewing previous run data, one click brings up the time slip.

For a full list of features Click Here

RPM Basic Kit

Part Number	Description	Racer Price
60-DL10KIT	R P M Data Logger 10 Channel Basic Kit	$600.00

RPM Data Logger System Components

Part Number	Description	Racer Price
60-DL10	R P M Data Logger 10 Channel Box Only	$450.00
60-DLT8	R P M 8 Channel E G T Expansion Module	$380.00
60-DUSB	R P M Download Adapter U S B	$25.00

RPM Accessories

Part Number	Description	Racer Price
60-DRC218	R P M Split Collar 4 Magnet 2 1/8	$70.00
60-DRS3	R P M Sensor R P M Brass 3/8 X 1.5	$70.00
60-DRM	R P M Sensor Magnet	$5.50
60-TACH-ADAPT	RPM Tach Adapter	$45.00

Temperature Accessories

Part Number	Description	Racer Price
60-DT300	R P M Sensor Temp 0-300 1/8 N P T 1	$75.00
60-DTEGT	R P M Probe E G T 2000 Deg 3/16	$60.00
60-DTAMP	R P M Amp Single E G T Required For E G T	$95.00
60-DTEXP4	R P M Dlt8 Plus All Sensors, Cables And Hardware For 4 Exhaust Gas Temps	$650.00

Pressure / Vacuum Accessories

Part Number	Description	Racer Price
60-DPV30	R P M Sensor Pressure 0-30 Pressure Or Vacum	$90.00
60-DP50	R P M Sensor Pressure 0-50	$110.00
60-DP100	R P M Sensor Pressure 0-100	$110.00
60-DP300	R P M Sensor Pressure 0-300	$110.00
60-DP500	R P M Sensor Pressure 0-500	$110.00
60-DP1500	R P M Sensor Pressure 0-1500	$110.00

Acceleration

Part Number	Description	Racer Price
60-DA25	R P M Accelerometer +/- 2.5 G	$180.00
60-DA50	R P M Accelerometer +/-5.0 G	$200.00

Position / Travel Accessories

Part Number	Description	Racer Price
60-DTR1	R P M Rotary Position Encoder	$40.00
60-DTR1L	R P M Rotary Position Encoder W/ 4	$50.00

Cables

Part Number	Description	Racer Price
60-DCA	R P M Cable Analog Ch 1-4 Or Accellerometer	$30.00
60-DCD	R P M Cable Digital Copnnector W/ Pigtail	$25.00
60-DCR	R P M Cable Replacement R P M Cable	$45.00
60-DCS	R P M Cable for 3rd RPM No Digital	$30.00
60-dcds	R P M Cable Digital Cable with 3rd RPM Input	$45.00
60-DCP	R P M Cable Replacement Power	$29.00

PLEASE NOTE: An RPM Tach Adapter is necessary when using a Schnitz Pro Series 2 Ignition