![]() |
|
|
|||||||||||
|
The Schnitz Progressive Nitrous Controller
utilizes a digital micro-controller for precise timing and control over
the injection of nitrous oxide. The rate of nitrous injection is
programmable for beginning and final power percentages. The unit also
contains a built in digital delay timer allowing precise control of the
starting time of the nitrous injection. An advanced feature is the ability
to select the pulse frequency that the nitrous and fuel solenoid operate
at. Also, a +12 volt output is available for activating an ignition retard
unit or relay. The output is controlled by a digital timer. The timer
starts when the unit is activated.
|
![]() |
||||||||||
|
NOTE: The timer system in this unit will automatically reset 20 seconds after being activated. If the activation power is removed and then re-activated, the Progressive Nitrous Unit will continue from the point where activation was halted. If you get out of the throttle and get back into it, you pick up at the point where you left off. All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.
![]() Motorcycle Performance Specialties ©1995-2008 Motorcycle Performance Specialties. All rights reserved. | Privacy Policy
|
|||||||||||