Earl's Auto-Flex Hose

Auto-Flex™ Hose

A stainless braided hose at a price competitive with the imports. Earl's Auto-Flex^TM HTE stainless braid-protected synthetic rubber hose is manufactured to our specifications in the U.S.A.

Earl's Auto-Flex HTE hose features a recommended temperature range and maximum operating pressure equal to our premium quality Perform-O-Flex hose...at a much better price. A partial coverage textile inner braid is imbedded in the HTE liner during manufacture. The hose is finished with a full coverage stainless steel braid which is bonded to the reinforced HTE liner. Continuous use temperature rating is -40 to +300° F.

Auto-Flex hose is intended for use with Swivel-Seal, Auto-Fit and Auto-Mate hose ends only. No other Earl's hose ends are intended for use with Auto-Flex^TM hose. The use of other manufacturers hose ends is not recommended.

Features

A Partial Coverage Textile Inner Braid is woven into the inner liner of high-temperature synthetic rubber. The timing of the braiding and the curing of the rubber during construction are the key to achieving the desired flexibility and mechanical bond between the braiding layers. Beware of cheaper hoses that do not have this critical mechanical bond.

B The Inner Liner constructed from synthetic rubber tube, clean and fast flowing, provides constant flow at operating temperatures from -40° to +300ۥ F.

C Full Coverage High Tensile Stainless Steel bonded to the hose liner provides maximum pressure capabilities, while maintaining the beauty, and flexibility that is responsible for the popularity of Perform-O-Flex hose.

HOSE
SIZE I.D. O.D. MAXIMUM
OPERATING
PRESSURE (PSI)* CLAMPED
MAXIMUM PRESSURE
RATING (PSI)** MINIMUM
BEND
RADIUS TYPICAL APPLICATION

3 5/32" 3/8" *** 250 2.00" Small oil & fuel lines, pressure gauges, vacuum lines.

4 7/32" 7/16" 1500 250 2.00" Small oil & fuel lines, pressure gauges, vacuum lines.

6 11/32" 35/64" 1500 250 2.50" Carburetor, oil & fuel lines.

8 7/16" 41/64" 1500 250 3.50" Water, oil & fuel lines.

Note: Because we deal predominately with motorcycles, we usually only stock -3, -4, and -6 sizes. We can special order anything Earl's offers.

Part Number Description Racer Price

40-300003ERL Earl's -3 Auto-Flex™ Hose per foot
$9.46

40-300004ERL Earl's -4 Auto-Flex™ Hose per foot
$6.6

40-300006ERL Earl's -6 Auto-Flex™ Hose per foot
$6.6

40-300008ERL Earl's -8 Auto-Flex™ Hose Bulk
$7.94

40-303003ERL Earl's -3 Auto-Flex™ Hose 3 ft
$30.85

40-303004ERL Earl's -4 Auto-Flex™ Hose 3 ft
$22.43

40-303006ERL Earl's -6 Auto-Flex™ Hose 3 ft
$22.43

40-303008ERL Earl's -8 Auto-Flex™ Hose 3 ft
$26.51

40-306003ERL Earl's -3 Auto-Flex™ Hose 6 ft
$59.1

40-306004ERL Earl's -4 Auto-Flex™ Hose 6 ft
$42.11

40-306006ERL Earl's -6 Auto-Flex™ Hose 6 ft
$42.11

40-306008ERL Earl's -8 Auto-Flex™ Hose 6 ft
$50.39

40-310003ERL Earl's -3 Auto-Flex™ Hose 10 ft
$98.53

40-310004ERL Earl's -4 Auto-Flex™ Hose 10 ft
$70.23

40-310006ERL Earl's -6 Auto-Flex™ Hose 10 ft
$70.23

40-310008ERL Earl's -8 Auto-Flex™ Hose 10 ft
$83.91

40-320003ERL Earl's -3 Auto-Flex™ Hose 20 ft
$197.9

40-320004ERL Earl's -4 Auto-Flex™ Hose 20 ft
$138.49

40-320006ERL Earl's -6 Auto-Flex™ Hose 20 ft
$138.49

40-320008ERL Earl's -8 Auto-Flex™ Hose 20 ft
$167.31

In recent years various fuel manufacturers may have added any number of new unpublished additives to their blends. It is therefore very difficult to know how the tube compound used in the inner liner of our Super-stock, Auto Flex and Perfor-O-Flex or any other brand of elastomeric hose will react with a specific fuel. Because of the unknowns described above, we are unable to guarantee that the below listed hoses are the best possible products to use with any specific fuel. If in doubt use Teflon lined hose. Auto-Flex hose is not to be used with brake fluid.

* When used with Auto-Fit or Swivel Seal hose ends.
** Pressure limiting factor will be the hose clamp. The hose limit far exceeds any pressure obtainable by clamping.
*** Only Econo-O-Fit available for these sizes.

HOSE SIZE	I.D.	O.D.	MAXIMUM OPERATING PRESSURE (PSI)*	CLAMPED MAXIMUM PRESSURE RATING (PSI)**	MINIMUM BEND RADIUS	TYPICAL APPLICATION
3	5/32"	3/8"	***	250	2.00"	Small oil & fuel lines, pressure gauges, vacuum lines.
4	7/32"	7/16"	1500	250	2.00"	Small oil & fuel lines, pressure gauges, vacuum lines.
6	11/32"	35/64"	1500	250	2.50"	Carburetor, oil & fuel lines.
8	7/16"	41/64"	1500	250	3.50"	Water, oil & fuel lines.

All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.

Motorcycle Performance Specialties
5350 McIntosh Point #132 - Sanford, Florida - 32773
Phone: (407)330-9727 - Fax: (407) 322-8632
Sales E-Mail: sales@mpsracing.com

	A Partial Coverage Textile Inner Braid is woven into the inner liner of high-temperature synthetic rubber. The timing of the braiding and the curing of the rubber during construction are the key to achieving the desired flexibility and mechanical bond between the braiding layers. Beware of cheaper hoses that do not have this critical mechanical bond.
	B The Inner Liner constructed from synthetic rubber tube, clean and fast flowing, provides constant flow at operating temperatures from -40° to +300ۥ F.
	C Full Coverage High Tensile Stainless Steel bonded to the hose liner provides maximum pressure capabilities, while maintaining the beauty, and flexibility that is responsible for the popularity of Perform-O-Flex hose.