![]() |

Swivel-Seal™ Hose Ends

This unique line of hose ends has been developed to allow the hose end to be
threaded directly into a female port without the bulk and complication of an
adapter fitting. In all cases the coupler can be rotated independently of the
hose end, this allows the coupler to be threaded into the part while the hose
and hose end are held stationary. Both step-up and step-down coupler sizes are
available as listed below.
Note: Because we deal predominately with motorcycles, we usually only stock -3, -4, and -6 sizes. We can special order anything Earl's offers.
When you need to reuse a hose end and the sockets are
damaged or worn, you can now order replacement
sockets!
Swivel-Seal hose ends are designed to be used with Earl's
Perform-O-Flex™, Pro-Lite 350™ & Auto-Flex™ braid-protected hose. Not intended for use on
any other Earl's hose. Use with other manufacturers' hose is not
recommended.
All parts sold by MPS are for off road closed course use. They are not intended for use on public streets or highways.

Motorcycle Performance Specialties
5350 McIntosh Point #132 - Sanford, Florida - 32773
Phone: (407)330-9727 - Fax: (407) 322-8632
Sales E-Mail: sales@mpsracing.com
©1995-2005 Motorcycle Performance Specialties. All rights reserved. | Privacy Policy