MPS High Pressure Components
- Hundreds of shifts from one bottle fill
- Kits for any bottle size
- Small Size
The MPS CO2 System 7 P/N 1-0333 converts your low pressure air shifter system into a regulated high pressure system capable of hundreds of shifts from a smaller bottle. The CO2 System 7 kit comes with a 7 ounce bottle with pin valve and a Regulator assembly for paintball bottles P/N 1-0329. The bottles can be filled at any paintball refill center.
The pin valves on CO2 bottles operate like schrader valves on a tire. Pushing down the pin opens the valve. The pin valve actuator works by pushing down on the pin when you screw the on-off knob clockwise. Since CO2 is a liquid in the bottle and the regulator can’t regulate liquid, you must mount the bottle so that only gas and no liquid can get into the regulator. The regulator has a female 1/8” NPT outlet port and four (4) 1/8” NPT ports that comes plugged. We fit a fitting that will accept ¼ poly line into the outlet. Our Adjustable Pressure Regulator allows pressure adjustment of CO2 and/or Nitrogen high pressure bottles from 0 – 160 psi. The regulator is set with a 3/16” allen wrench. We recommend having a small tank between the regulator and the air valve.
The Carolina Cycle hi pressure adjustable regulator is designed to be used with a Hi pressure air source to shift your motorcycle or keep a constant pressure on a boost controller.
- Adjustable from 20 psi to input pressure
- Designed for CO2 and Nitrogen (Will work with N20 but voids their warranty)
- Max input pressure 3,000 psi
- Has provisions for Hi and Low pressure gauge on regulator body.
|
Part Number |
Description | Racer Price | |
|---|---|---|---|
|
1-0352 |
MPS Adjustable Pressure Regulator 1/4'' NPT Output |
$103.95 |
|
|
1-0329 |
MPS Regulator Assembly Paintball Bottles |
$139.65 |
|
|
1-0333 |
MPS CO2 System 7 oz with Regulator |
$250.95 |
|
|
1-reg-Inner |
MPS Pressure Regulator Repair Kit (Plunger, Spring, Disk, Endcap,Screw) |
$38.85 |
|
|
1-0436 |
MPS Regulator Seal Kit |
$6.93 |
|
|
1-0325 |
MPS DOT Air Bottle 7 oz (no top, 2'' Diameter) |
$114.35 |
|
|
1-0367 |
MPS Pin Valve 5/8' Thread |
$17.32 |
|
|
1-0668 |
MPS Pin Valve O-Ring (Top Clear Urethane) |
$1.05 |
|
|
1-0328 |
MPS Pin Valve and Actuator CO2 With Hex Nipple |
$51.98 |
|
|
1-0340 |
MPS Pin Valve And Adapter 3/4'' to 5/8'' thread |
$40.42 |
|
|
1-0624 |
MPS Bottle Top Adapter 3/4-16 OD x 5/8-18 ID |
$28.88 |
|
|
1-0353 |
MPS Pin Valve Actuator with 1/8'' Hex Nipple |
$40.42 |
|
|
1-0377 |
MPS Paintball Filler Assembly |
$75.08 |
|
|
57-CCA12050 |
Carolina Cycle Pressure Regulator |
$99.00 |
|
